Liberty Utilities (Park Water) Corp. – Bellflower/Norwalk System

Provider briefing

How this utility’s billing works

Liberty Utilities (Park Water) Corp. – Bellflower/Norwalk System operates as a private investor-owned utility serving Bellflower and Norwalk, with portions of Artesia, Compton, Lynwood, and Santa Fe Springs. Customers should use the provider’s current account-specific bill and official customer-service instructions as the final authority for deadlines, balances, and service requests.

The published water-rate framework is described as Increasing block tiers plus a fixed readiness-to-serve charge. Current residential tariff PR-1-R lists $39.05 per month for a standard 5/8 x 3/4-inch meter, $4.421 per 100 cubic feet for the first 6 units, $5.895 for units 7–18, and $9.963 above 18; Norwalk accounts receive a 2.04% surcharge, and CPUC-approved surcharges or reimbursement fees can also apply.. Bills are generated monthly or bi-monthly at the utility's option; liberty's park water rule 9 states that the bellflower/norwalk meter-reading team reads water meters once every two months and reports usage in hundred-cubic-foot units on the normal bi-monthly bill., and a typical residential cost reference is Approximately $69–$88 per month for 5,000–7,000 gallons on a standard meter before applicable Norwalk, CPUC, or other tariff surcharges, calculated from the $39.05 readiness charge and the PR-1-R tier quantities; actual bills vary with the two-month read and service territory.. These descriptions are useful planning benchmarks; actual charges can change with meter size, usage, sewer averaging, local taxes, drought stages, or account-specific fees.

Wastewater and sewer calculation

Liberty Park Water's reviewed tariff is a drinking-water tariff and does not bill municipal wastewater in the same account. Sewer charges, if applicable, are normally billed by the customer's city or another sewer provider rather than calculated as a Liberty percentage of water intake. The water bill itself applies metered ccf consumption and does not publish a winter sewer-average formula.

Meter and infrastructure notes

Radio-frequency Automatic Meter Reading (AMR) meters are read by Liberty's meter-reading team from the street without entering the property, normally once every two months. The readings are reported in centum cubic feet, with one ccf equal to 748 gallons; customers can view read and consumption history through Infinity.Link.